signalling rate - definição. O que é signalling rate. Significado, conceito
Diclib.com
Dicionário ChatGPT
Digite uma palavra ou frase em qualquer idioma 👆
Idioma:

Tradução e análise de palavras por inteligência artificial ChatGPT

Nesta página você pode obter uma análise detalhada de uma palavra ou frase, produzida usando a melhor tecnologia de inteligência artificial até o momento:

  • como a palavra é usada
  • frequência de uso
  • é usado com mais frequência na fala oral ou escrita
  • opções de tradução de palavras
  • exemplos de uso (várias frases com tradução)
  • etimologia

O que (quem) é signalling rate - definição

BIT RATE EQUIVALENT TO THE TRANSMISSION RATE FOR GIVEN DATA ELEMENTS
Maximum user signaling rate; Data rates; Signalling speed; Data signalling rate; Signaling rate

signalling rate      
<communications> The number of times per second the amplitude, frequency or phase of the signal transmitted down a communications channel changes each second. The signalling rate is measured in baud. (1998-02-14)
Data signaling rate         
In telecommunication, data signaling rate (DSR), also known as gross bit rate, is the aggregate rate at which data passes a point in the transmission path of a data transmission system.
Amplitude modulation signalling system         
BROADCAST TECHNOLOGY
AM Signalling System; Amplitude Modulation Signalling System
The amplitude modulation signalling system (AMSS or the AM signalling system) is a digital system for adding low bit rate information to an analogue amplitude modulated broadcast signal in the same manner as the Radio Data System (RDS) for frequency modulated (FM) broadcast signals.

Wikipédia

Data signaling rate

In telecommunication, data signaling rate (DSR), also known as gross bit rate, is the aggregate rate at which data passes a point in the transmission path of a data transmission system.

  1. The DSR is usually expressed in bits per second.
  2. The data signaling rate is given by i = 1 m log 2 n i T i {\displaystyle \sum _{i=1}^{m}{\frac {\log _{2}{n_{i}}}{T_{i}}}} where m is the number of parallel channels, ni is the number of significant conditions of the modulation in the i-th channel, and Ti is the unit interval, expressed in seconds, for the i-th channel.
  3. For serial transmission in a single channel, the DSR reduces to (1/T)log2n; with a two-condition modulation, i. e. n = 2, the DSR is 1/T, according to Hartley's law.
  4. For parallel transmission with equal unit intervals and equal numbers of significant conditions on each channel, the DSR is (m/T)log2n; in the case of a two-condition modulation, this reduces to m/T.
  5. The DSR may be expressed in bauds, in which case, the factor log2ni in the above summation formula should be deleted when calculating bauds.
  6. In synchronous binary signaling, the DSR in bits per second may be numerically the same as the modulation rate expressed in bauds. Signal processors, such as four-phase modems, cannot change the DSR, but the modulation rate depends on the line modulation scheme, in accordance with Note 4. For example, in a 2400 bit/s 4-phase sending modem, the signaling rate is 2400 bit/s on the serial input side, but the modulation rate is only 1200 bauds on the 4-phase output side.